antec fusion v2 volume knob and lirc

different subject same story, there are no exact instructions on how to make the volume knob work with lirc, so i will do a quick howto on that too.

for me there was nothing special about getting the knob to work.
i just installed lirc as described in the post below, after that i played around with irrecord and that’s it.
(fyi: irrecord creates a [remote] section for the lirc config)
if you want to do this yourself use this command:
#irrecord -d=/dev/lirc
follow the instructions.

antec fusion v2 imon vfd + lirc/LCDd howto

since there are no exact instructions on how to get the vfd to work with LCDd/lirc i will write a quick HowTo.

if you know the thread on codeka.com about how to get it to work it might be helpful, but the instructions there are not all you need to know.

first you need lirc and LCDd.
use these vars in your make.conf:
LCD_DEVICES="imon"
LIRC_DEVICES="imon imon_knob imon_lcd imon_pad"

add this line to your /etc/portage/package.use file
app-misc/lcdproc lirc usb

now just emerge lirc and lcdproc.